Filter
Top Products
Chapter 5: Configuring the Spanning Tree
168
S-UHF/902 MHz
Awake Time
(S-UHF and 902
MHz radios only)
Specifies the amount of time that a wireless end
device stays awake when radios are inactive. A
sleeping device is less responsive to radio
activity; however, the longer a device is kept fully
awake, the larger the drain on the battery. You
should set a device to stay awake long enough to
receive an expected reply to a transmission and
short enough to reduce power consumption. The
awake time can be set to a number from 0 to 250
tenths of a second.
RFC1042 Types to
Pass Through
(802.11g, 802.11b,
or 802.11a radios
only)
If the RFC1042/DIX Conversion field is Enabled,
this parameter specifies values for protocol types
that are to be passed without conversion. The list
includes the Apple Talk protocol type, value
80F3.
Values entered in this parameter represent the
protocol types of frames that will be passed
without conversion to DIX format.
Table 48. Global RF Parameter Descriptions (Continued)
Parameter Explanation