Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
121
5. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.
6. (Optional) Configure security by clicking Configure security settings for
this radio. For help, see Chapter 6, “Configuring Security” on
page 169.
Table 37. 802.11a Radio Parameter Descriptions
Parameter Explanation
Frequency
(Master radio only)
Choose the frequency within the 5.15 to 5.35
GHz range that this access point uses to transmit
and receive frames. You can also set the
frequency to Dynamic, which lets the access
point choose the best available channel to use.
The available frequencies depend on the country
and the radio option configured on the access
point. See the Table 38, ”Worldwide Frequencies
for the 802.11a Radio” on page 123. If the radio is
a mid range radio, you can only choose 52, 56,
60, or 64.
You may want to use a single frequency to isolate
the installation to part of the band; for example,
use a single frequency if other wireless networks
or microwave ovens are in the area.
Allow Wireless
Access Points
Choose which service set provides connection for
wireless access points:
On Primary: The primary service set connects to
wireless access points.
On Secondary n: The secondary service set n
(where n is 1, 2, or 3) connects to wireless access
points.
Do not allow wireless access points: No service
set connects to wireless access points. You can
block access points from forming a wireless hop
to this radio entirely.