Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
195
5. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.
6. Configure the RADIUS server by clicking Select a RADIUS server for
802.1x authentication. The RADIUS Server List screen appears.
7. For each authentication server, enter the IP address or DNS name,
enter the shared secret key, port number, and check the 802.1x check
box.
Note
If you enter more than one authentication server, see page 132 for a
description of how the access point uses the servers.
8. Configure the database. Depending on the authentication type, enter
the information for each end device that is allowed to communicate
with the 802.1x network:
In the EAS database, in the Type field choose the authentication
type and then enter the information for each end device. For help,
see Chapter 7, “Configuring the Embedded Authentication Server
(EAS)” on page 204.
For help configuring an external RADIUS server, see the
documentation that came with your server. You need to enter each
authenticator’s IP address and the shared secret key. In the
database, you need to enter the information for each end device.