Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
191
3. Click Submit Changes to save your changes. This screen appears.
4. Configure the parameters for WEP configuration. To ensure maximum
security, configure each WEP key with a different WEP code. For help,
see the next table.
5. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.
Table 52. WEP Security Parameter Descriptions
Parameter Explanation
Security Level Select Static WEP from the drop-down menu to
use WEP 64/128/152 security.
WEP Transmit Key Determines which of the four WEP keys this
access point uses to transmit data.
WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
For WEP 64, enter five ASCII characters or five
hex pairs. For WEP 128, enter 13 ASCII
characters or hex pairs. For WEP 152, enter 16
ASCII characters or hex pairs.
To enter a hexadecimal key, prefix it with 0x. For
example, the ASCII key ABCDE is equivalent to
0x4142434445.