Emerson MODBUS IP Power Supply User Manual


 
BACnet Communications - Thermal Management Products
295 Liebert
®
IntelliSlot
®
Modbus/BACnet IP
Supply Fluid Over Temp Threshold Threshold value used in the [Supply Fluid Over Temp] event.
Supply Fluid Over Temp
[Supply Fluid Temperature] has exceeded [Supply Fluid Over Temp
Threshold].
Supply Fluid Temp Sensor Issue - Event
Control
Enable/disable the activation of the [Supply Fluid Temp Sensor Issue] event. If
set to 'disabled', the event will not be annunciated. This implies that the event
will not be placed in any active event list or in any event history list.
Supply Fluid Temp Sensor Issue - Event
Type
The event type for the [Supply Fluid Temp Sensor Issue] event.
Supply Fluid Temp Sensor Issue
The supply fluid temperature sensor is disconnected or the signal is out of
range.
Supply Fluid Temperature Supply fluid temperature.
Supply Fluid Under Temp - Event Control
Enable/disable the activation of the [Supply Fluid Under Temp] event. If set to
'disabled', the event will not be annunciated. This implies that the event will not
be placed in any active event list or in any event history list.
Supply Fluid Under Temp - Event Type The event type for the [Supply Fluid Under Temp] event.
Supply Fluid Under Temp [Supply Fluid Temperature] has dropped below a specified threshold.
Supply Refrig Over Temp - Event Control
Enable/disable the activation of the [Supply Refrigerant Over Temp] event. If
set to 'disabled', the event will not be annunciated. This implies that the event
will not be placed in any active event list or in any event history list.
Supply Refrig Over Temp - Event Type The event type for the [Supply Refrigerant Over Temp] event.
Supply Refrig Over Temp Threshold Threshold value used in the [Supply Refrigerant Over Temp] event.
Supply Refrig Temp Sensor Issue - Event
Control
Enable/disable the activation of the [Supply Refrigerant Temp Sensor Issue]
event. If set to 'disabled', the event will not be annunciated. This implies that
the event will not be placed in any active event list or in any event history list.
Supply Refrig Temp Sensor Issue - Event
Type
The event type for the [Supply Refrigerant Temp Sensor Issue] event.
Supply Refrig Under Temp Control - Event
Enable/disable the activation of the [Supply Refrigerant Under Temp] event. If
set to 'disabled', the event will not be annunciated. This implies that the event
will not be placed in any active event list or in any event history list.
Supply Refrig Under Temp - Event Type The event type for the [Supply Refrigerant Under Temp] event.
Supply Refrigerant Over Temp
Event that is activated when [Supply Refrigerant Temperature] exceeds
[Supply Refrig Over Temp Threshold]. The event is deactivated when the
temperature drops below the threshold.
Supply Refrigerant Temp Sensor Issue
The supply refrigeramt temperature sensor is disconnected or the signal is out
of range.
Supply Refrigerant Temperature Supply refrigerant temperature.
Supply Refrigerant Under Temp [Supply Refrigerant Temperature] has dropped below a specified threshold.
System Condensation Detected - Event
Control
Enable/disable the activation of the [System Condensation Detected] event. If
set to 'disabled', the event will not be annunciated. This implies that the event
will not be placed in any active event list or in any event history list.
System Condensation Detected - Event
Type
The event type for the [System Condensation Detected] event.
System Condensation Detected System condensation detected.
System Control Mode System control mode.
System Date and Time The system date and time
System Event Acknowledge/Reset Reset and/or acknowledge all events.
System On/Off Control Turn system functionality on or off.
System Operating State Reason The reason the system is in the current operating state.
System Operating State Current operating state of the system.
System Status The operating status for the system.
Table 95 Liebert XDP
, Liebert XDC
- Glossary (continued)
Data Label Data Description