Filter
Top Products
Configuring OSPF
7. Select the Save
link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device’s flash memory.
Displaying OSPF Information
You can use CLI commands and Web management options to display the following OSPF information:
• Trap, area, and interface information – see “Displaying General OSPF Configuration Information” on page 8-
39.
• Area information – see “Displaying OSPF Area Information” on page 8-40.
• Neighbor information – see “Displaying OSPF Neighbor Information” on page 8-41.
• Interface information – see “Displaying OSPF Interface Information” on page 8-43.
• Route information – see “Displaying OSPF Route Information” on page 8-43.
• External link state information – see “Displaying OSPF External Link State Information” on page 8-45.
• Link state information – see “Displaying OSPF Link State Information” on page 8-46.
• Virtual Neighbor information – see “Displaying OSPF Virtual Neighbor Information” on page 8-47.
• Virtual Link information – see “Displaying OSPF Virtual Link Information” on page 8-47.
• ABR and ASBR information – see “Displaying OSPF ABR and ASBR Information” on page 8-48.
• Trap state information – see “Displaying OSPF Trap Status” on page 8-48.
Displaying General OSPF Configuration Information
To display general OSPF configuration information, enter the following command at any CLI level:
HP9300> show ip ospf config
Router OSPF: Enabled
Redistribution: Disabled
Default OSPF Metric: 10
OSPF Redistribution Metric: Type2
OSPF External LSA Limit: 25000
OSPF Database Overflow Interval: 0
RFC 1583 Compatibility: Enabled
Router id: 207.95.11.128
Interface State Change Trap:
Virtual Interface State Change Trap:
Neighbor State Change Trap:
Virtual Neighbor State Change Trap:
Interface Configuration Error Trap:
Virtual Interface Configuration Error Trap:
Interface Authentication Failure Trap:
Virtual Interface Authentication Failure Trap:
Interface Receive Bad Packet Trap:
Virtual Interface Receive Bad Packet Trap:
Interface Retransmit Packet Trap:
Virtual Interface Retransmit Packet Trap:
Originate LSA Trap:
Originate MaxAge LSA Trap:
Link State Database Overflow Trap:
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
8 - 39