Filter
Top Products
Configuring BGP4
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to BGP in the tree view to expand the list of BGP option links.
4. Click on the Network
link.
• If the device does not have any BGP networks configured, the BGP Network configuration panel is
displayed, as shown in the following example.
• If a BGP network is already configured and you are adding a new one, click on the Add Network
link to
display the BGP Network configuration panel, as shown in the following example.
• If you are modifying an existing BGP network, click on the Modify button to the right of the row describing
the network to display the BGP Network configuration panel, as shown in the following example.
5. Enter the network address in the IP Address field.
6. Enter the network mask in the Mask field.
7. Optionally enter a weight to be added to routes to this network.
8. If you want to tag the route as a backdoor route, select Enable next to Back Door.
9. Click the Apply button to apply the changes to the device’s running-config file.
10. Select the Save
link at the bottom of the dialog, then select Yes when prompted to save the configuration
change to the startup-config file on the device’s flash memory.
Specifying a Route Map Name when Configuring BGP4 Network Information
You can specify a route map as one of the parameters when you configure a BGP4 network to be advertised. The
routing switch can use the route map to set or change BGP4 attributes when creating a local BGP4 route.
To configure network information and use a route map to set or change BGP4 attributes, use the following CLI
method.
NOTE: You must configure the route map before you can specify the route map name in a BGP4 network
configuration.
USING THE CLI
To configure a route map, and use it to set or change route attributes for a network you define for BGP4 to
advertise, enter commands such as the following:
HP9300(config)# route-map set_net permit 1
HP9300(config-routemap set_net)# set community no-export
HP9300(config-routemap set_net)# exit
10 - 27