Filter
Top Products
Advanced Configuration and Management Guide
Table 8.4: CLI Display of OSPF Route Information (Continued)
Mask The network mask for the route.
Path_Cost The cost of this route path. (A route can have multiple paths. Each
path represents a different exit port for the routing switch.)
Type2_Cost The type 2 cost of this path.
Path_Type The type of path, which can be one of the following:
• Inter – The path to the destination passes into another area.
• Intra – The path to the destination is entirely within the local
area.
• External1 – The path to the destination is a type 1 external
route.
• External2 – The path to the destination is a type 2 external
route.
Adv_Router The OSPF router that advertised the route to this HP routing switch.
Link-State The link state from which the route was calculated.
Dest_Type The destination type, which can be one of the following:
• ABR – Area Border Router
• ASBR – Autonomous System Boundary Router
• Network – the network
State The route state, which can be one of the following:
• Changed
• Invalid
• Valid
This information is used by HP technical support.
Tag The external route tag.
Flags State information for the route entry. his information is used by HP
technical support.
Paths The number of paths to the destination.
Out_Port The port through which the routing switch reaches the next hop for
this route path.
Next_Hop The IP address of the next-hop router for this path.
Type The route type, which can be one of the following:
• OSPF
• Static Replaced by OSPF
Arp_Index The index position in the ARP table of the ARP entry for this path's IP
address.
State State information for the path. is information is used by HP
technical support.
This Field... Displays...
T
Th
8 - 44