Filter
Top Products
Advanced Configuration and Management Guide
3. Click on the plus sign next to DVMRP in the tree view to expand the list of DVMRP option links.
4. Click on the General
link to display the DVMRP configuration panel.
5. Enter a value from 5 – 3600 in the Graft Retransmit Time field.
6. Click the Apply button to save the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device’s flash memory.
Modifying Probe Interval
The Probe Interval defines how often neighbor probe messages are sent to the ALL-DVMRP-ROUTERS IP
multicast group address. A router’s probe message lists those neighbor DVMRP routers from which it has
received probes. Possible values are from 5 – 30 seconds. The default value is 10 seconds.
USING THE CLI
To modify the probe interval setting to 10, enter the following:
HP9300(config-dvmrp-router)# probe 10
Syntax: probe-interval <5-30>
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to DVMRP in the tree view to expand the list of DVMRP option links.
4. Click on the General
link to display the DVMRP configuration panel.
5. Enter a value from 5 – 30 in the Probe Interval field.
6. Click the Apply button to save the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device’s flash memory.
Modifying Report Interval
The Report Interval defines how often routing switches propagate their complete routing tables to other neighbor
DVMRP routers. Possible values are from 10 – 2000 seconds. The default value is 60 seconds.
USING THE CLI
To support propagation of DVMRP routing information to the network every 90 seconds, enter the following:
HP9300(config-dvmrp-router)# report 90
Syntax: report-interval <10-2000>
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to DVMRP in the tree view to expand the list of DVMRP option links.
4. Click on the General
link to display the DVMRP configuration panel.
5. Enter a value from 10 – 2000 in the Report Interval field.
6. Click the Apply button to save the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device’s flash memory.
9 - 46