Filter
Top Products
Configuring AppleTalk
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to AppleTalk in the tree view to expand the list of AppleTalk option links.
4. Click on the General
link to display the AppleTalk configuration panel.
5. Select Enable next to Glean Packet.
6. Click the Apply button to apply the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog, then select Yes when prompted to save the configuration
change to the startup-config file on the device’s flash memory.
AppleTalk QoS Socket
The user can use the QoS socket parameter to assign a higher priority to specific AppleTalk sockets. Possible
values are 0 (normal priority) to 7 (highest priority). The default value for all sockets is 0.
For more information and procedures, see “Assigning AppleTalk Sockets to Priority Queues” on page 2-25.
AppleTalk RTMP Update Interval
You can change the RTMP update interval to modify how often the routing switch sends RTMP updates on
AppleTalk interfaces. Possible values are from 1 – 3600 seconds. The default is 10 seconds.
EXAMPLE:
To change the value to 50 seconds from a default value of 10 seconds, use one of the following methods.
USING THE CLI
HP9300(config)# appletalk rtmp-update-interval 50
Syntax: appletalk rtmp-update-interval <1-3600>
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to AppleTalk in the tree view to expand the list of AppleTalk option links.
4. Click on the General
link to display the AppleTalk configuration panel.
5. Enter a new RTMP update interval from 1 – 3600 in the RTMP Update Interval field. For this example, enter
50.
6. Click the Apply button to apply the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog, then select Yes when prompted to save the configuration
change to the startup-config file on the device’s flash memory.
AppleTalk ZIP Query Interval
You can change the ZIP query interval to modify how often the routing switch retransmits ZIP query messages.
Possible values are from 1 – 1000 seconds. The default is 10 seconds.
EXAMPLE:
To change the ZIP query interval to 30 seconds from the default value (10 seconds), use one of the following
methods.
USING THE CLI
HP9300(config)# appletalk zip-query-interval 30
Syntax: appletalk zip-query <1-1000>
15 - 19