Filter
Top Products
of your outgoing message, record an additional 4 - 5 seconds of silence
with no background noise. Try to receive a fax again.
Note Some digital answering machines might not retain the recorded
silence at the end of your outgoing message. Play back your
outgoing message to check.
● If your HP all-in-one shares the same phone line with other types of phone
equipment, such as an answering machine, a PC modem, or multi-port switch
box, the fax signal level might be reduced. This can cause problems during fax
reception.
To find out if other equipment is causing a problem, disconnect everything
except the HP all-in-one from the phone line, and then try to receive a fax. If
you can receive faxes successfully without the other equipment, one or more
pieces of the other equipment is causing problems; try adding them back one
at a time and receiving a fax each time, until you identify which equipment is
causing the problem.
● If you have a special ring pattern for your fax phone number (using a distinctive
ring service through your telephone company), make sure that the Answer
Ring Pattern feature on your HP all-in-one is set to match. For example, if the
telephone company has assigned your fax number a double ring pattern, make
sure Double Rings is selected as the Answer Ring Pattern setting. For
information on changing this setting, see Change the answer ring pattern
(distinctive ringing).
Note The HP all-in-one cannot recognize some ring patterns, such as those
with alternating short and long ringing patterns. If you are having
problems with a ring pattern of this type, ask your telephone company to
assign a non-alternating ring pattern.
Fax tones are recorded on my answering machine
Solution
● When you have an answering machine on the same phone line you use for fax
calls, try connecting the answering machine directly to the HP all-in-one as
described in Fax setup. If you do not connect the answering machine as
recommended, fax tones might be recorded on your answering machine.
● Make sure your HP all-in-one is set to receive faxes automatically. If your
HP all-in-one is set up to receive faxes manually, the HP all-in-one will not
answer incoming calls. You must be available to respond in person to incoming
fax calls, or the HP all-in-one will not receive the fax and your answering
machine will record the fax tones. For information on setting up your HP all-
in-one to receive faxes automatically, see Set up the HP all-in-one to receive
faxes.
● Make sure the Rings to Answer setting is correct. The number of rings to
answer for the HP all-in-one should be greater than the number of rings to
answer for the answering machine. If the answering machine and the HP all-
in-one are set to the same number of rings to answer, both devices will
answer the call, and fax tones will be recorded on the answering machine.
Set your answering machine to answer in 4 rings and your HP all-in-one to
answer in the maximum number of rings supported by your device. (The
maximum number of rings varies by country/region.) In this setup, the
Chapter 16
188 HP Photosmart 2600/2700 series all-in-one
Troubleshooting information