Filter
Top Products
5 Replace the output tray.
To load postcards or Hagaki cards in the optional rear tray
➔
The HP Auto Two-sided Print Accessory with Small Paper Tray and the
Hagaki Tray with Auto Two-sided Print Accessory are available for this product.
For information on loading paper in either of these accessories, read and follow the
instructions that came with the accessory.
Load envelopes
You can load one or more envelopes into the input tray of your HP all-in-one. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
Note For specific details on how to format text for printing on envelopes, consult the
help files in your word processing software. For best results, consider using a
label for the return address on envelopes.
To load envelopes
1 Remove the output tray.
2 Remove all paper from the input tray.
3 Insert one or more envelopes into the far right side of the input tray with the
envelope flaps up and to the left. Slide the stack of envelopes forward until it stops.
Tip For more help on loading envelopes, refer to the diagram engraved in the
base of the input tray.
4 Slide the paper-length and paper-width guides inward against the stack of
envelopes until they stop.
Do not overload the input tray; make sure the stack of envelopes fits within the
input tray and is no higher than the top of the paper-width guide.
5 Replace the output tray.
User Guide 41
Load originals and load paper