Filter
Top Products
Note The menus shown in this section may vary in content depending on your
computer's operating system and which applications you set up as scan
destinations in the HP Image Zone.
Scan an original (USB-connected)
Follow these steps if your HP all-in-one is directly connected to a computer through a
USB cable.
1 Load your original face down in the right front corner of the glass.
2 Press Scan, if it is not already lit.
The Scan Menu appears, listing destinations, including applications, for anything
you scan. The default destination is whichever one you selected the last time you
used this menu. You designate which applications and other destinations appear
on the Scan Menu by using the HP Image Zone on your computer.
3 To select an application to receive the scan, press its number on the control panel
or use the arrow keys to highlight it and then press OK or Start Color. To force the
scan to be in black and white, press Start Black instead of OK.
A preview image of the scan appears in the HP Scan window on the computer,
where you can edit it.
For more information about editing a preview image, see the onscreen HP Image
Zone Help that came with your software.
4 Make any edits to the preview image in the HP Scan window. When you have
finished, click Accept.
The HP all-in-one sends the scan to the selected application. For example, if you
chose the HP Image Zone, it automatically opens and displays the image.
Scan an original (network-connected)
Follow these steps if your HP all-in-one is connected to one or more computers over a
network.
1 Load your original face down in the right front corner of the glass.
2 Press Scan, if it is not already lit.
The Scan Menu appears, listing various options.
3 Press 1 to choose Select Computer or use the arrow keys to highlight it and then
press OK.
The Select Computer menu appears, listing computers connected to the HP all-
in-one.
Note The Select Computer menu may list computers with a USB connection in
addition to those connected through the network.
4 To select the default computer, press OK. To select another computer, press its
number on the control panel or use the arrow keys to highlight your selection and
then press OK. To send the scan to an application on your computer, choose your
computer in the menu.
The Scan Menu appears, listing destinations, including applications, for anything
you scan. The default destination is whichever one you selected the last time you
used this menu. You designate which destinations appear on the Scan Menu by
using the HP Image Zone on your computer. For more information, see the
onscreen HP Image Zone Help that came with your software.
Chapter 8
70 HP Photosmart 2600/2700 series all-in-one
Scan