Filter
Top Products
cartridges installed, you have a six-ink system. For more information, see Use a photo
print cartridge.
Note In order to achieve a borderless print without changing the proportions of the
original, the HP all-in-one might crop some of the image around the margins. In
most cases, this cropping will not be noticeable.
1 Load letter or A4 photo paper in the input tray.
2 Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3 Press Copy to display the Copy Menu.
4 Press 2, and then press 3.
This displays the Reduce/Enlarge menu and then selects Fill Entire Page.
5 Press Start Copy Color.
Tip If the output is not borderless, then set the paper size to Letter Borderless or
A4 Borderless, set the paper type to Photo Paper, set the Photo
enhancement, and then try again.
For information on setting the paper size, see Set the copy paper size.
For information on setting the paper type, see Set the copy paper type.
For information on setting the Photo enhancement, see Enhance light areas
of your copy.
Copy a photo several times on one page
You can print multiple copies of an original on one page by selecting an image size from
the Reduce/Enlarge option in the Copy Menu.
After you select one of the available sizes, you might be prompted whether you want to
print multiple copies of the photo to fill the paper you have loaded in the input tray.
1 Make sure you have paper loaded in the input tray.
2 Load your original photo face down on the right front corner of the glass.
Chapter 7
64 HP Photosmart 2600/2700 series all-in-one
Use the copy features