Filter
Top Products
8: Device Ports
SLB™ Branch Office Manager User Guide 107
2. Enter the following:
Switching Delay
Number of milliseconds the SLB branch office manager between
subsequent switching. The range is 1000-2500 msec. The
default is 2000 msec (2 sec).
Over Current
Alarm
If SNMP traps are enabled (see 7:Services), a trap (alarm) is
sent if the total current for all outlets exceeds a threshold. Enter
the number of amps (measured in tenths of an amp) above
which the SLB device sends a trap. The maximum is 180.
Note: If the alarm goes off, a warning message displays on the
CLI.
Current Level for
all Outlets
Displays the total load carried by the outlets.
3. View or enter the following information for each outlet:
Outlet
Displays the number of the outlet being configured.
Status
Displays the current state of the outlet.
Name
User-configurable name identifying the outlet.
Description
(optional)
User-configurable text describing the outlet.
Power State
Select whether the power should be on or off. Default is Off.
Wakeup Mode
Select whether, after a reboot, the power state for the outlet