Filter
Top Products
8: Device Ports
SLB™ Branch Office Manager User Guide 87
IP Address
IP address used for this device port so a user can Telnet,
SSH, or establish a raw TCP connection to this address and
connect directly to the device port.
For Telnet and SSH, the default TCP port numbers (22 and
23, respectively) are used to connect to the device port. For
raw TCP, the TCP port number defined for TCP In to the
device port is used.
Web SSH/Telnet
Columns
Number of columns in the Web SSH/Telnet applet when this
device port is accessed via the applet.
Web SSH/Telnet
Rows
Number of rows in the Web SSH/Telnet applet when this
device port is accessed via the applet.
Data Settings
Note: Check the serial device’s equipment settings and documentation for the
proper settings. The device port and the attached serial device must have the
same settings.
Baud
The speed with which the device port exchanges data with
the attached serial device.
From the drop-down list, select the baud rate. Most devices
use 9600 for the administration port, so the device port
defaults to this value. Check the equipment settings and
documentation for the proper baud rate.
Data Bits
Number of data bits used to transmit a character. From the
drop-down list, select the number of data bits. The default
is 8 data bits.
Stop Bits
The number of stop bit(s) used to indicate that a byte of
data has been transmitted. From the drop-down list, select
the number of stop bits. The default is 1.
Parity
Parity checking is a rudimentary method of detecting
simple, single-bit errors. From the drop-down list, select the
parity. The default is none.
Flow Control
A method of preventing buffer overflow and loss of data.
The available methods include none, xon/xoff (software),
and RTS/CTS (hardware). The default is none.
Enable Logins
For serial devices connected to the device port, displays a
login prompt and authenticates users. Successfully
authenticated users are logged into the command line
interface.
Disabled is the default and is the correct setting if the
device port is the endpoint for a connection.