Lantronix 900-510 Switch User Manual


 
8: Device Ports
SLB™ Branch Office Manager User Guide 84
To configure settings for all or a group of device ports:
set deviceport global <one or more parameters>
Parameters:
maxdirect <1-10>
Sets the maximum number of direct connections for each device port.
sshport <TCP Port>
tcpport <TCP Port>
telnetport <TCP Port>
Port is a port number between 1025 and 65535.
To view global settings for device ports:
show deviceport global
Global Commands
The following CLI commands correspond to the web page entries described above.
To configure settings for all or a group of device ports:
set deviceport global <one or more parameters>
Parameters:
maxdirect <1-10>
Sets the maximum number of direct connections for each device port.
sshport <TCP Port>
tcpport <TCP Port>
telnetport <TCP Port>
Port is a port number between 1025 and 65535.
To view global settings for device ports:
show deviceport global
Device Ports Settings
On the Device Ports - Settings page, configure IP and data (serial) settings for individual
ports, and if the port connects to an external modem, modem settings as well.
To open the Device Ports Settings page:
1. You have two options:
In the Device Ports page (described in the previous section), select the port from
the ports list and click the Configure button.