7: Services
SLB™ Branch Office Manager User Guide 76
Secure Lantronix Network Commands
The following commands for the command line interface correspond to the web page
entries described above.
To detect and view all SLB branch office manager or user-defined IP addresses on
the local network:
set slcnetwork <one or more parameters>
Parameters:
add <IP Address>
delete <IP Address>
search <localsubnet|ipaddrlist|both>
To detect and display all secure IT managers and Spiders on the local network:
show slcnetwork [ipaddrlist <all|Address Mask>]
Note: Without the ipaddrlist parameter, the command searches the network
according to the search setting. With the ipaddrlist parameter, the command
displays a sorted list of all IP addresses or displays the IP addresses that match
the mask (for example, 172.19.255.255 would display all IP addresses that start
with 172.19).
Date and Time
You can specify the current date, time, and time zone at the SLB branch office manager’s
location (default), or the SLB device can use NTP to synchronize with other NTP devices
on your network.
To set the local date, time, and time zone:
1. Click the Services tab and select the Date & Time option. The following page
displays: