Filter
Top Products
4: Quick Setup
SLB™ Branch Office Manager User Guide 38
IP Address (if
specifying)
An IP address that will be unique and valid on your network and in the
same subnet as your PC. There is no default.
If you selected DHCP or BOOTP, this prompt does not display.
Enter all IP addresses in dot-quad notation. Do not use leading zeros
in the fields for dot-quad numbers less than 100. For example, if your
IP address is 172.19.201.28, do not enter 028 for the last segment.
Note: Configurations with the same IP subnet on multiple interfaces
(Ethernet or PPP) are not currently supported.
Subnet Mask
The subnet mask specifies the network segment on which the branch
office manager resides. There is no default. If you selected DHCP or
BOOTP, this prompt does not display.
Default Gateway
IP address of the router for this network. There is no default.
Hostname
The default host name is slbXXXX, where XXXX is the last 4
characters of the hardware address of Ethernet Port 1. There is a 64-
character limit (contiguous characters, no spaces).
Note: The host name becomes the prompt in the command line
interface.
Domain
If desired, specify a domain name (for example,
support.lantronix.com). The domain name is used for host name
resolution within the SLB branch office manager. For example, if abcd
is specified for the SMTP server, and mydomain.com is specified for
the domain, if abcd cannot be resolved, the SLB device attempts to
resolve abcd.mydomain.com for the SMTP server.
Time Zone
If the time zone displayed is incorrect, enter the correct time zone and
press Enter. If the entry is not a valid time zone, the system guides
you through selecting a time zone. A list of valid regions and countries
displays. At the prompts, enter the correct region and country.
Date/Time If the date and time displayed are correct, type n and continue. If the
date and time are incorrect, type y and enter the correct date and time
in the formats shown at the prompts.
Sysadmin
password
Enter a new sysadmin password.
After you complete the Quick Setup script, the changes take effect immediately.