5: Web and Command Line Interfaces
SLB™ Branch Office Manager User Guide 44
Command Syntax
Commands have the following format:
<action> <category> <parameter(s)>
where
<action> is set, show, connect, admin, diag, pccard, or logout.
<category> is a group of related parameters whose settings you want to configure or
view. Examples are ntp, deviceport, and network.
<parameter(s)> is one or more name-value pairs in one of the following formats:
<parameter name> <aa
bb>
User must specify one of the values (aa
or bb) separated by a vertical line ( | ).
The values are in all lowercase and must
be entered exactly as shown. Bold
indicates a default value.
<parameter name> <Value>
User must specify an appropriate value,
for example, an IP address. The
parameter values are in mixed case.
Square brackets [ ] indicate optional
parameters.
Table 5-1. Actions and Category Options
Action
Category
set
network | ipfilter | routing | datetime | ntp | services |
nfs | cifs | menu | hostlist | auth | localusers |
remoteusers | ldap | radius | kerberos | tacacs+ |
consoleport | deviceport | nis | slcnetwork | command |
sshkey | password | history | cli | locallog | power
show
network | ipfilter | routing | datetime | ntp | services |
nfs | cifs | menu | hostlist | auth | localusers | nis |
ldap | radius | kerberos | tacacs+ | consoleport |
deviceport | locallog | sysstatus | syslog | auditlog |
portstatus | sysconfig | portcounters | connections |
slcnetwork | sshkey | history | cli | user | remoteusers |
power
connect
direct | listen | bidirection | unidirection | terminate
diag
ping | loopback | traceroute | arp | lookup | netstat |
perfstat | sendpacket | nettrace | internals
pccard
storage | modem
admin
reboot | shutdown | ftp | config | firmware | version |
banner | keypad | quicksetup | web | events | lcd
logout
Terminates CLI session.