Filter
Top Products
7: Services
SLB™ Branch Office Manager User Guide 66
V3 Read-Only User
User Name
SNMP v3 is secure and requires user-based
authorization to access SLB MIB objects. Enter a user
ID. The default is snmpuser. Up to 20 characters.
V3
Password/Retype
Password
Password for a user with read-only authority to use to
access SNMP v3. The default is SNMPPASS. Up to 20
characters.
Passphrase/
Retype
Passphrase
Passphrase associated with the password for a user
with read-only authority. Up to 20 characters.
V3 Read-Write User
User Name
SNMP v3 is secure and requires user-based
authorization to access SLB MIB objects. Enter a user
ID for users with read-write authority. The default is
snmprwuser. Up to 20 characters.
V3
Password/Retype
Password
Password for the user with read-write authority to use
to access SNMP v3. The default is SNMPRWPASS. Up
to 20 characters.
Passphrase/
Retype
Passphrase
Passphrase associated with the password for a user
with read-write authority. Up to 20 characters.
3. To save, click the Apply button.
SNMP, SSH, Telnet, and Logging Commands
The following CLI commands correspond to the web page entries described above.
To configure services (system logging, SSH and Telnet access, SSH and Telnet
timeout, SNMP agent, email (SMTP) server, and audit log):
set services <one or more services parameters>
Parameters:
alarmdelay <1-6000 Seconds>
auditlog <enable|disable>
auditsize <Size in Kbytes>
Range is 1-500 Kbytes.
authlog <off|error|warning|info|debug>
clicommands <enable|disable>
contact <Admin contact info>
devlog <off|error|warning|info|debug>
diaglog <off|error|warning|info|debug>
genlog <off|error|warning|info|debug>
includesyslog <enable|disable>