Lantronix 900-510 Switch User Manual


 
SLB™ Branch Office Manager User Guide 212
14: Command Reference
After an introduction to using commands, this chapter lists and describes all of the
commands available on the SLB command line interface accessed through Telnet, SSH,
or a serial connection. The commands are in alphabetical order by category.
Introduction to Commands
Following is some information about command syntax, command line help, and tips for
using commands.
Command Syntax
Commands have the following format:
<action> <category> <parameter(s)>
where
<action> is set, show, connect, admin, diag, pccard, or logout.
<category> is a group of related parameters whose settings you want to configure or
view. Examples are ntp, deviceport, and network.
<parameter(s)> is one or more name-value pairs in one of the following formats:
<parameter name> <aabb>
User must specify one of the values (aa or bb)
separated by a vertical line ( | ). The values
are in all lowercase and must be entered
exactly as shown. Bold indicates a default
value.
<parameter name> <Value>
User must specify an appropriate value, for
example, an IP address. The parameter
values are in mixed case.
Square brackets [ ]
indicate optional parameters.