11: User Authentication
SLB™ Branch Office Manager User Guide 156
Break
Sequence
A series of 1-10 characters users can enter on the command
line interface to send a break signal to the external device. A
suggested value is Esc+B (escape key, then uppercase “B”
performed quickly but not simultaneously). You would specify
this value as \x1bB, which is hexadecimal (\x) character 27
(1B) followed by a B.
Data Ports
The ports users are able to monitor and interact with using
the connect direct command. U and L denote the PC
Card upper and lower slots.
Listen Port
The ports users are able to monitor using the connect
listen command.
Clear Port Buffers
The ports whose port buffer users may clear using the set
locallog clear command.
Access Outlets
The power outlets users may monitor and configure.
Note: Older RADIUS servers may use 1645 as the default port. Check your
RADIUS server configuration.
3. In the User Rights section, select the user group to which RADIUS users will
belong.
Group
Select the group to which the RADIUS users will belong:
Default Users: This group has only the most basic rights.
You can specify additional rights for the individual user.
Power Users: This group has the same rights as Default
Users plus Networking, Date/Time, Reboot & Shutdown,
and Diagnostics & Reports.
Administrators: This group has all possible rights.
4. Select or clear the checkboxes for the following rights:
Full Administrative
Right to add, update, and delete all editable fields.
Networking
Right to enter Network settings.
Services
Right to enable and disable system logging, SSH and Telnet
logins, SNMP, and SMTP.
Secure Lantronix
Network
Right to view and manage secure IT management units (e.g.,
SLP power managers, Spiders, SLB branch office managers)
on the local subnet.
Date/Time
Right to set the date and time.
Local Users
Right to add or delete local users on the system.
Remote
Authentication
Right to assign a remote user to a user group and assign a
set of rights to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create a custom user menu for the CLI for NIS users.