Filter
Top Products
7: Services
SLB™ Branch Office Manager User Guide 71
Network Interfaces
Select the network ports from which the share can
be seen. The default is for the share to be visible
on both network ports.
CIFS User
Password/Retype
Password
Only one user special username (cifsuser) can
access the CIFS share. Enter the CIFS user
password in both password fields. The default
user password is CIFSPASS.
More than one user can access the share with the
cifsuser user name and password at the same
time.
Workgroup
The Windows workgroup to which the SLB branch
office manager belongs. Every PC exporting a
CIFS share must belong to a workgroup. Can
have up to 15 characters.
4. To save, click the Apply button.
NFS and SMB/CIFS Commands
The following CLI commands correspond to the web page entries described above.
To mount a remote NFS share:
set nfs mount <one or more parameters>
Parameters:
locdir <Directory>
mount <enable|disable>
remdir <Remote NFS Directory>
rw <enable|disable>
Enables read/write access to remote directory.
Note: The remdir and locdir parameters are required, but if you specified them previously,
you do not need to provide them again.
To unmount a remote NFS share:
set nfs unmount <1|2|3>
To view NFS share settings:
show nfs