Lantronix 900-510 Switch User Manual


 
8: Device Ports
SLB™ Branch Office Manager User Guide 110
Escape Sequence
The escape character used to get the attention of the SSH
or Telnet client. It is optional, and if not specified, Telnet
and SSH use their default escape character.
For Telnet, the escape character is either a single
character or a two-character sequence consisting of '^'
followed by one character. If the second character is '?', the
DEL character is selected. Otherwise, the second character
is converted to a control character and used as the escape
character.
For SSH, the escape character is a single character.
4. Click the right arrow. The host displays in the Hosts box.
5. Repeat steps 2-4 to add more hosts to the host list.
Note: To clear fields before adding the next host, click the Clear Host Parameters
button.
6. You have the following options:
To remove a host from the host list, select the host in the Hosts box and click the
left arrow.
To give the host a higher precedence, select the host in the Hosts box and click
the up arrow.
To give the host a lower precedence, select the host in the Hosts box and click
the down arrow.
7. Click the Add Host List button. After the process completes, a link back to the
Device Ports Settings page displays.