Filter
Top Products
5: Web and Command Line Interfaces
SLB™ Branch Office Manager User Guide 41
Figure 5-1. Web Page Layout
The web page has the following components:
Tabs: Groups of settings to configure.
Options: Below each tab are options for specific types of settings.
Note: Only those options for which the currently logged-in user has rights display.
Port, Switch, and Power Outlet Bar:
The E1 and E2 buttons display the Network – Settings page.
The left-most number buttons allow you to select a port and display its
settings. Only ports to which the currently logged-in user has rights are
enabled.
Below the bar are two options for use with the port buttons. Selecting a port and
the Configuration option takes you to the Device Port Settings page. Selecting a
port and the WebSSH option displays the WebSSH window for the device port --
if Web SSH is enabled, and if SSH is enabled for the device port.
S (switch) buttons refer to the unmanaged Ethernet switch ports on the back
of the unit. The firmware does not currently configure or control them.
Buttons P1 - P4 enable you to select a power outlet and display the Power
Outlets page with the selected outlet's information highlighted.
The A and B buttons display the status of the power supplies.
Entry Fields and Options: Allow you to enter data and select options for the settings.
Port
Number Bar
Logout Button
Entry Fields and
Optons
Apply Button
Help
Button
Icons
Tabs
Options