Filter
Top Products
12: Maintenance and Operation
SLB™ Branch Office Manager User Guide 202
Status Commands
These commands for the command line interface correspond to the web page entries
described above.
To display device port modes and states for one or more ports:
You can optionally email the displayed information.
show portstatus [deviceport <Device Port List or Name>] [email
<Email Address>]
To display a snapshot of configurable parameters:
You can optionally email the displayed information.
show sysconfig [display <basic|auth|devices>] [email <Email
Address]
Displays a report of all configurable parameters or a shorter report with
basic system settings, authentication settings, or device settings.
To generate a report for one or more ports:
You can optionally email the displayed information.
show portcounters [deviceport <Device Port List or Name>] [email
<Email Address>]
To display the overall status of all SLB devices:
You can optionally email the displayed information.
show sysstatus [email <Email Address>]
To display a list of all current connections:
You can optionally email the displayed information.
show connections [email <Email Address>]
To provide details, e.g., endpoint parameters and trigger, for a specific connection:
You can optionally email the displayed information.
show connections connid <Connection ID> [email <Email Address>]
Note: Use the basic show connections command to obtain the Connection ID.
Events
On this page, you can define what action you want to take for events that may occur in
the SLB branch office manager.
1. Click the Maintenance tab and select the Events option. The following page
displays: