Filter
Top Products
8: Device Ports
SLB™ Branch Office Manager User Guide 93
Infeed Status
Click the link to view the status of the data the SLP power
manager is receiving.
System Info
Click the link to see system information pertaining to the SLP
device.
SLP Commands
Restart SLP
To restart the SLP power manager, select the checkbox.
Control Outlet For Tower A or Tower B, select All Outlets or Single Outlet
and the number of the outlet to be controlled (1-8 for the
SLP8 power manager or 1-16 for the SLP16 power manager)
and select the command for the outlet (No Action, Power On,
Power Off, Cycle Power). No Action is the default.
2. Click the Apply button.
Device Port – Sensorsoft Device
Devices made by Sensorsoft are used to monitor environmental conditions.
1. In the Connected to field above the IP Settings section of the Device Ports –
Settings page, select Sensorsoft.
2. Click the Device Commands link. The following page displays:
3. Select a port and enter or view the following information:
Device Port (view
only)
Number of the SLB port.
Device Name (view
only)
Name of the SLB port.
Temp (°C)
Current temperature (degrees Celsius) on the device the
sensor is monitoring.
Low Temp
Enter the temperature (degrees Celsius) permitted on the
monitored device below which the SLB branch office
manager sends a trap.
High Temp
Enter the temperature (degrees Celsius) permitted on the
monitored device above which the SLB device sends a trap.