Filter
Top Products
4: Quick Setup
SLB™ Branch Office Manager User Guide 35
Eth 1 Settings Disabled: If selected, disables the network port. Default is
Eth1 enabled.
Obtain from DHCP: Acquires IP address, subnet mask,
hostname and gateway from the DHCP server. (The DHCP
server may not provide the hostname gateway, depending
on its setup.) This is the default setting. If you select this
option, skip to Gateway.
Obtain from BOOTP: Lets a network node request
configuration information from a BOOTP "server" node. If
you select this option, skip to Gateway.
Specify: Lets you manually assign a static IP address,
generally provided by the system administrator.
IP Address (if
specifying)
Enter an IP address that will be unique and valid on your
network. There is no default.
Enter all IP addresses in dot-quad notation. Do not use
leading zeros in the fields for dot-quad numbers less than
100. For example, if your IP address is 172.19.201.28, do
not enter 028 for the last segment.
Note: Currently, the SLB branch office manager does not
support configurations with the same IP subnet on multiple
interfaces (Ethernet or PPP).
Subnet Mask
If specifying an IP address, enter the network segment on
which the SLB device resides. There is no default.
Default Gateway
The IP address of the router for this network. There is no
default.
Hostname
The default host name is slbXXXX, where XXXX is the last
4 characters of the hardware address of Ethernet Port 1.
There is a 64-character limit (contiguous characters, no
spaces). The host name becomes the prompt in the
command line interface.
Domain
If desired, specify a domain name (for example,
support.lantronix.com). The domain name is used for host
name resolution within the SLB branch office manager. For
example, if abcd is specified for the SMTP server, and
mydomain.com is specified for the domain, if abcd cannot
be resolved, the SLB device attempts to resolve
abcd.mydomain.com for the SMTP server.
Date & Time Settings
Change Date/Time
Select the checkbox to manually enter the date and time
at the SLB branch office manager’s location.
Date
From the drop-down lists, select the current month, day,
and year.
Time
From the drop-down lists, select the current hour and
minute.
Time Zone
From the drop-down list, select the appropriate time zone.