Filter
Top Products
13: Application Examples
SLB™ Branch Office Manager User Guide 207
Telnet/SSH to a Remote Device
The following figure shows a Sun server connected to port 2 of the SLB device.
Figure 13-2. Remote User Connected to a SUN Server via the SLB Device
In this example, the sysadmin would:
1. Display the current settings for device port 2:
[SLB]> show deviceport port 2
___Current Device Port
Settings________________________________________________
Number: 2 Name: Port-2
Modem Settings-------------------Data Settings----------IP Settings---------
Modem State: disabled Baud Rate: 9600 Telnet: disabled
Modem Mode: text Data Bits: 8 Telnet Port: 2002
Timeout Logins: disabled Stop Bits: 1 SSH: disabled
Local IP: negotiate Parity: none SSH Port: 3002
Remote IP: negotiate Flow Control: xon/xoff IP: <none>
Authentication: PAP Logins: disabled
CHAP Host: <none> Break Sequence: \x1bB
CHAP Secret: <none> Check DSR: disabled
NAT: disabled Close DSR: disabled
Dial-out Login: <none>
Dial-out Password: <none>
Dial-out Number: <none>
Dial-back Number: usernumber
Initialization Script: <none>
Logging Settings--------------------------------------------------------------
-
Local Logging: disabled PC Card Logging: disabled
Email Logging: disabled Log to: upper slot
Byte Threshold: 100 Max number of files: 10
Email Delay: 60 seconds Max size of files: 2048
Restart Delay: 60 seconds
Email To: <none>
Email Subject: Port %d Logging
Email String: <none>
NFS File Logging: disabled
Directory to log to: <none>
Max number of files: 10
Max size of files: 2048
2. Change the baud to 57600 and disable flow control:
[SLB]> set deviceport port 2 baud 57600 flowcontrol none
Device Port settings successfully updated.
Serial Cable to Device Port 2
Sun Server
Remote User
SLB Branch Office Manager
Internet