Filter
Top Products
SLB™ Branch Office Manager User Guide 114
9: PC Cards
You can use the PC Card page to configure storage (Compact Flash) and modem/ISDN
PC cards. A Compact Flash is useful for saving and restoring configurations (see
Configuration Management on page 182) and for Device Port Logging (see PC Card
Logging on page 99). The SLB branch office manager supports a variety of Compact
Flash-to-PC Card adapters, as well as modem and Basic Rate Interface (BRI) ISDN
cards. (See the Lantronix web site for a complete list.)
To set up PC Card storage in the SLB device:
1. Insert any of the supported PC Cards into either of the PC Card bays on the front
of the SLB branch office manager. (You can do this before or after powering up the
SLB device.)
If the card is a compact Flash-to-PC Card adapter, and the first partition on the
Compact Flash is formatted with a file system supported by the SLB branch office
manager (ext2 and FAT), the card mounts automatically.
2. If the card does not mount automatically, or if you want to update its settings, click
the Devices tab and select the PC Card option. The following page displays.
3. From the PC Card Slots table, select the button (on the right) for the PC Card you
want to configure for storage and click the Configure button. The following page
displays.