Lantronix 900-510 Switch User Manual


 
10: Connections
SLB™ Branch Office Manager User Guide 126
VT100 Terminals
SLB Branch Office Manager
Server
Typical Setup Scenarios for the SLB Device
Following are typical configurations in which SLB connections can be used, with
references to settings on the Connections and Device Ports web pages.
Terminal Server
In this setup, the SLB branch office manager acts as a multiplexer of serial data to a
single server computer. Terminal devices are connected to the serial ports of the SLB
device and configured as a Device Port to Telnet out type connection on the
Connections page. The users of the terminals can access the server as if they were
connected directly to it by local serial ports or a console.
Remote Access Server
In this setup, the SLB branch office manager is connected to one or more modems by its
device ports. Configure the device ports on the Device Ports - Settings web page by
selecting the Dial-in option in the Modem Settings section. Most customers use the
modems in PPP mode to establish an IP connection to the SLB device and either Telnet
or SSH into the SLB branch office manager. They could also select text mode where,
using a terminal emulation program, a user could dial into the SLB device and connect to
the command line interface.
Telnet
Sessions
Serial
Connections
Telnet
Sessions
(via Network
connection)
Internal
Network
Modems
Serial
Connections
Network
Connections
Phone
System
SLB Branch Office Manager