Lantronix 900-510 Switch User Manual


 
12: Maintenance and Operation
SLB™ Branch Office Manager User Guide 204
SNMP Trap OID
Enter a unique identifier for an SNMP object. (An SNMP object is
anything that can hold a value and can be read using an SNMP
"get" action.) The OID consists of a string of numbers separated
by periods (for example, 1.1.3.2.1). Each number is part of a
group represented by the number on its left.
3. You have the following options:
To add the defined event, click the Add Event button. The event displays in
the Events table at the bottom of the page.
To edit an event, select the event from the Events table and click the Edit
Event button. The Events page displays the event.
To delete an event, select the event from the Events table and click the
Delete Event button. A message asks for confirmation. Click OK.
4. To save, click Apply.
Events Commands
To manage the response to events that occur in the SLB branch office manager:
admin events add <trigger> <response>
<trigger> is one of:
|receivetrap|templimit|humidlimit|overcurrent|
<response> is one of:
action <syslog>
action <fwdalltrapseth|fwdseltrapeth> ethport <1|2>
nms <SNMP NMS> community <SNMP Community> [oid <SNMP
OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> deviceport
<Device Port # or Name> nms <SNMP NMS> community
<SNMP Community> [oid <SNMP Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> pccardslot
<upper|lower> nms <SNMP NMS> community <SNMP
Community> [oid <SNMP Trap OID>]
action <emailalert> emailaddress <destination email
address>