Filter
Top Products
8: Device Ports
SLB™ Branch Office Manager User Guide 109
2. Enter the following:
Note: To clear fields in the lower part of the page, click the Clear Host List button.
Host List Id (view
only)
Displays after a host list is saved.
Host List Name
Enter a name for the host list.
Retry Count
Enter the number of times the SLB branch office manager
should attempt to retry connecting to the host list.
Authentication
Select to require authentication when the SLB device
connects to a host.
3. You have the following options:
To save the host list without adding hosts at this time, click the Add Host List
button.
To add hosts, enter the following:
Host Parameters
Host
Name or IP address of the host.
Protocol
Protocol for connecting to the host (TCP, SSH, or Telnet).
Port
Port on the host to connect to.