Filter
Top Products
14: Command Reference
SLB™ Branch Office Manager User Guide 256
set power switchingdelay
Syntax
set power switchingdelay <Delay in msec>
Description
Sets the delay after switching on an outlet before switching on the next.
show power
Syntax
show power <Outlet # or Name>
Description
Displays power settings for all outlets or for a single outlet.
Note: The screen displays PND when the outlet is powering up and is waiting for the delay period
to expire. It displays RBT when an outlet has been told to reboot and is waiting for the reboot
interval to expire (default is 20 seconds.) The switching delay and the reboot interval are
completely independent of each other.
Routing Commands
set routing
Syntax
set routing [parameters]
Parameters
rip <enable|disable>
route <1-64> ipaddr <IP Address> mask <Netmask> gateway <IP Address>
static <enable|disable>
version <1|2|both>
Description
Configures static or dynamic routing.
To delete a static route, set the IP address, mask, and gateway parameters to 0.0.0.0.
show routing
Syntax
show routing [resolveip <enable|disable>] [email <Email Address>]
Description
Sets the routing table to display IP addresses (disable) or the corresponding host names
(enable). You can optionally email the displayed information.