12: Maintenance and Operation
SLB™ Branch Office Manager User Guide 203
2. Enter the following:
Event Trigger
From the drop-down list, select the type of incident that triggers an
event. Currently, the options are:
Receive Trap
Temperature Over/Under Limit: For Sensorsoft devices.
Humidity Over/Under Limit: For Sensorsoft devices.
Action
From the drop-down list, select the action taken because of the
trigger. For example, the action can be writing an entry into the
syslog with details of the event or sending the trap(s) to the
Ethernet or modem connection.
Ethernet
For actions that require an Ethernet connection (for example,
Forward All Traps to Ethernet), select the Ethernet port to use.
Modem
Connection on
For actions that require a modem connection (for example,
Forward All Traps to a Modem Connection, select which device
port or PC Card slot with a modem connection to use.
NMS/Host to
forward trap to
For actions that forward a trap, enter the IP address of the
computer to forward the trap to. The computer does not have to
be an SNMP NMS; it just has to be capable of receiving SNMP
traps.
SNMP Community
Forwarded traps are sent with this SNMP community value
There is no default.