7: Services
SLB™ Branch Office Manager User Guide 78
Synchronize via
Select one of the following:
Broadcast from NTP Server: Enables the SLB
branch office manager to accept time information
periodically transmitted by the NTP server. This is
the default if you enable NTP.
Poll NTP Server: Enables the SLB device to query
the NTP Server for the correct time. If you select this
option, complete one of the following:
Local: Select this option if the NTP servers are
on a local network, and enter the IP address of
up to three NTP servers. This is the default, and
it is highly recommended.
Public: Select this option if you want to use a
public NTP server, and select the address of the
NTP server from the drop-down list. This is not
recommended because of the high load on many
public NTP servers. All servers in the drop-down
list are stratum-2 servers. (See www.ntp.org
for
more information.)
Each public NTP server has its own usage rules -
-please refer to the appropriate web site before
using one. Our listing them here is to provide
easy configuration but does not indicate any
permission for use.
2. To save, click the Apply button.
Date and Time Commands
The following CLI commands correspond to the web page entries described above.
To set the local date, time, and local time zone (one parameter at a time):
set datetime <one date/time parameter>
Parameters:
date <MMDDYYhhmm[ss]>
timezone <Time Zone>
Note: If you type an invalid time zone, the system guides you through the
process of selecting a time zone.
To view the local date, time, and time zone:
show datetime