Filter
Top Products
12: Maintenance and Operation
SLB™ Branch Office Manager User Guide 188
To enable or disable iGoogle Gadget web content:
admin web gadget <enable|disable>
To configure the timeout for web sessions:
admin web timeout <disable|5-120>
Timeouts are measured in minutes.
To terminate a web session:
admin web terminate <web session id>
To view current timeout and all active web sessions:
admin web show
To list current hardware and firmware information:
admin version
To update SLB firmware to a new revision:
Note: The firmware file should be accessible via the settings displayed by admin ftp show.
The SLB branch office manager automatically reboots after successful update.
admin firmware update <ftp|tftp|sftp> file <Firmware File> key
<Checksum Key>
To set the boot bank to be used at the next SLB reboot:
admin firmware bootbank <1|2>
Applies to dual-boot SLB devices only.
To list the current firmware revision:
admin firmware show [viewlog <enable|disable>]
Lists the current firmware revision, the boot bank status (for dual-boot SLB branch office
managers), and optionally displays the log containing details about firmware updates.
To lock or unlock the LCD keypad:
Note: If the keypad is locked, users can scroll through settings but not change them.
admin keypad <lock|unlock>
To change the Restore Factory Defaults password used at the LCD to return the SLB
branch office manager to the factory settings:
admin keypad password <Password>
Must be 6 digits.