Filter
Top Products
8: Device Ports
SLB™ Branch Office Manager User Guide 81
Permissions
There are three types of permissions:
Direct (or data) mode: The user can interact with and monitor the device port
(connect direct command).
Listen mode: The user can only monitor the device port (connect listen
command).
Clear mode: The user can clear the contents of the device port buffer (set
locallog <port> clear buffer command).
The administrator and users with local user rights may assign individual port permissions
to local users. The administrator and users with remote authentication rights assign port
access to users authenticated by NIS, RADIUS, LDAP, Kerberos and TACACS+.
Device Status
The Device Status page displays the status of the SLB branch office manager's ports, PC
card slots and power outlets.
1. Click the Devices tab and select the Device Status option. The following page
displays:
Global Port Settings
On the Device Ports page, you can set up the numbering of Telnet, SSH, and TCP ports,
view a summary of current port modes, establish the maximum number of direct
connections for each device port, and select individual ports to configure.
1. Click the Devices tab and select the Device Status option. The following page
displays: