Filter
Top Products
SLB™ Branch Office Manager User Guide 267
C: Safety Information
Safety Precautions
Please follow the safety precautions described below when installing and operating the
SLB branch office manager.
Cover
Do not remove the cover of the chassis. There are no user-serviceable parts
inside. Opening or removing the cover may expose you to dangerous voltage
that could cause fire or electric shock.
Refer all servicing to Lantronix.
Power Plug
When disconnecting the power cable from the socket, pull on the plug, not
the cord.
Always connect the power cord to a properly wired and grounded power
source. Do not use adapter plugs or remove the grounding prong from the
cord.
Only use a power cord with a voltage and current rating greater than the
voltage and current rating marked on the SLB branch office manager.
Install the SLB device near an AC outlet that is easily accessible.
Always connect any equipment used with the product to properly wired and
grounded power sources.
To help protect the product from sudden, transient increases and decreases
in electrical power, use a surge suppressor, line conditioner, or
uninterruptible power supply (UPS).
Do not connect or disconnect this product during an electrical storm.
Input Supply
This SLB branch office manager may have more than one power supply source.
Disconnect all power supply sources before servicing to avoid electric shock.
Check nameplate ratings to assure there is no overloading of supply circuits
that could affect over current protection and supply wiring.
Grounding
Maintain reliable grounding of this product.
Pay particular attention to supply connections when connecting to power
strips, rather than directly to the branch circuit.
Install DC-rated equipment only under the following conditions:
− Connect the equipment to a DC supply source that is electrically isolated from the
AC source and reliably connected to ground, or connect it to a DC (SELV) source.