Filter
Top Products
6: Basic Parameters
SLB™ Branch Office Manager User Guide 53
To view all network settings:
show network all
To view Ethernet port settings and counters:
show network port <1|2>
To view DNS settings:
show network dns
To view gateway settings:
show network gateway
To view the host name of the SLB device:
show network host
IP Filter
IP filters (also called a rule set) act as a firewall to allow or deny individual or a range of
IP addresses, ports, and protocols. When a network connection is configured to use an
IP filter, all network traffic through that connection is compared, in order, to the rules of
that filter. Network traffic may be allowed to pass, it may be dropped (without notice), or it
may be rejected (sends back an error packet) depending upon the rules of that filter rule
set.
The administrator uses the Network – IP Filter page to view, add, edit, delete, and map IP
filters,
Warning: IP filters configuration is a feature for advanced users. Adding and
enabling IP filter sets incorrectly can disable your SLB branch office manager.
Viewing IP Filters
You can view a list of filters and a table showing how each filter is mapped to an
interface.
To view a list of IP filters:
1. Click the Network tab and select the IP Filter option. The following page displays: