Filter
Top Products
Is there more than one network printer displayed?
All Lexmark printers connected on your network should be displayed in the Printer Selection dialog. If there is more
than one printer of the same model in your network, you must know the MAC address of the network printer that you
want to connect to, and select the printer displaying that MAC address. For more information, see “Finding the MAC
address” on page 8.
Page does not print
These are possible solutions. Try one or more of the following:
Check power
If the light is not on, see “Power button is not lit” on page 155.
Load paper correctly
Remove the paper from the paper support, and then load the paper again.
Check the ink levels
Check the ink levels, and install new print cartridges if necessary.
Remove tape on cartridges
1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
1
2
1
2
3 Reinstall the cartridges.
Make sure the printer is set as the default printer and is not on hold or paused
To set printer as default
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility, depending
on the operating system version you are using.
2 From the Printer List dialog, select your printer.
3 Click the Make Default icon.
To resume print jobs
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility, depending
on the operating system version you are using.
2 From the list of printers, double-click your printer.
The printer pop-up menu appears.
Troubleshooting
158