Filter
Top Products
3 Click Defaults.
Related topics:
• “Using the All-In-One Center” on page 138
• “Customizing scan settings from the Scan dialog” on page 48
Performing printing and related tasks
Printing a document
1 Load paper.
2 With a document open, click File Print.
3 From the Printer pop-up menu, choose 7500 Series.
4 From the third pop-up menu from the top, select the settings you want to adjust, and adjust the settings.
You can specify print quality, the number of copies to print, the type of paper you're printing on, and how you
want the pages to print.
5 Click Print.
Related topics:
• “Loading paper” on page 18
• “Using the Print dialog” on page 134
Printing photos
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable
side, see the instructions that came with the paper.)
Note: For best results, use Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper. Do not use Lexmark
Premium Photo Paper. Your print cartridges are not compatible with this type of paper.
2 Customize the settings as needed in the Page Setup dialog.
a With a photo open, choose File Page Setup.
b From the “Format for” pop-up menu, choose 7500 Series.
c From the Paper Size pop-up menu, choose the paper size loaded.
d Choose an orientation.
e Click OK.
3 Customize the settings as needed in the Print dialog.
a With a photo open, choose File Print.
b From the Printer pop-up menu, choose 7500 Series.
c For Mac OS X version 10.4 or later, click Advanced. Otherwise, proceed to the next step.
d From the Copies & Pages pop-up menu, type the number of copies to be printed in the Copies field.
e From the same pop-up menu, choose Quality & Media.
• From the Paper Type pop-up menu, choose the type of paper you are using.
• From the Print Quality menu, choose Automatic or Best.
f Click Print.
Printing
24