Filter
Top Products
Chapter 23 Port Authentication
IES-612-51A User’s Guide
183
23.3 802.1x Screen
To open this screen, click Advanced Application, Port Authentication, 802.1x.
Figure 87 802.1x
The following table describes the labels in this screen.
Retype Password to
confirm
Type the password again to make sure you have entered it properly.
Add Click Add to save your changes to the IES-612-51A’s volatile memory. The IES-
612-51A loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
This table displays the configured user profiles.
Index These are the numbers of the user profiles. Click this number to edit the user
profile.
Name This is the user name of the user profile.
Delete Select a user profile’s Delete check box and click Delete to remove the user
profile.
Cancel Click Cancel to begin configuring this screen afresh and clear any selected
Delete check boxes.
Table 52 RADIUS (continued)
LABEL DESCRIPTION
Table 53 802.1x
LABEL DESCRIPTION
RADIUS/Local
Profile
Click this link to configure the RADIUS server or local profile settings (see
Section 23.2 on page 182).
Enable Select this check box to turn on IEEE 802.1x authentication on the switch.
Apply Click Apply to save your changes to the IES-612-51A’s volatile memory. The
IES-612-51A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.