Chapter 53 Virtual Channel Management Commands
IES-612-51A User’s Guide
382
The following example removes a PVC that uses VPI 8 and VCI 36 from a PPVC with VPI 8
and VCI 35 for port 5.
53.6 PPVC Member Show Command
Syntax:
ras> adsl ppvc member show [<portlist> [<vpi> <vci>]]
where
This command displays the PVCs that are members of a PPVC.
The following example displays the PVCs that are members of a PPVC for port 5.
53.6.1 PPVC Show Command
Syntax:
ras> adsl ppvc show [<portlist> [<vpi> <vci>]]
where
Figure 265 PPVC Member Delete Command Example
ras> adsl ppvc member delete 5 8 35 8 36
<portlist> =
The port(s) of the PPVC.
You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
<vpi> =
The VPI of the PPVC.
<vci> =
The VCI of the PPVC.
<member vpi> =
The VPI of the individual PVC that you are displaying.
<member vci> =
The VCI of the individual PVC that you are displaying.
Figure 266 PPVC Member Show Command Example
ras> adsl ppvc member show 5
port vpi vci mvpi mvci level DS/US vcprofile
---- --- ----- ---- ----- ------ --------------------
5 8 35 8 36 2 DEFVAL/DEFVAL
<portlist> =
The port(s) of the PPVC.
You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
<vpi> =
The VPI of the PPVC.
<vci> =
The VCI of the PPVC.
