Chapter 53 Virtual Channel Management Commands
IES-612-51A User’s Guide
394
Figure 284 PAE PVC Show Command Example
53.8.4 PAE PVC Session Command
Syntax:
ras> adsl paepvc session <portlist> [<vpi> <vci>]
where
This command displays the status of PPPoA-to-PPPoE PVC sessions on the specified port(s)
or PVCs.
The following example displays the settings for port 1.
Figure 285 PAE PVC Session Command Example
53.8.5 PAE PVC Counter Command
Syntax:
ras> adsl paepvc counter <portlist> [<vpi> <vci>]
where
ras> adsl paepvc show 1
port vpi vci pvid pri htime US/DS vcprofile/acname/srvcname
---- --- ----- ---- --- ----- -----------------------------------
1 1 33 1 0 10 dsprofile: DEFVAL
usprofile:
acname : vom
srvcname : video
<portlist> =
The port number of the PAE PVC. You can specify a single
DSL port <1>, all DSL ports <*> or a list of DSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.
ras> adsl paepvc session 1
pvc 1-1/33
session state : down
session id : 0
session uptime: 0 secs
acname :
srvcname :
<portlist> =
The port number of the PAE PVC. You can specify a single
DSL port <1>, all DSL ports <*> or a list of DSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.