Filter
Top Products
Chapter 50 Firmware and Configuration File Maintenance Commands
IES-612-51A User’s Guide
338
1 Ensure that any changes you make to the commands in the configuration file
correspond to the commands documented in this User’s Guide. The wrong
configuration file or an incorrectly configured configuration file can render the
device inoperable.
" The sys user set admin command is encrypted and you cannot edit it in a text
editor. Attempting to edit it and upload it to the IES-612-51A will lock you out
after the system restarts. If this happens you will have to use the console port
to restore the default configuration file, and all of your configuration changes
will be lost.
50.3.3 Editable Configuration File Upload
You can upload the configuration file by following the steps below.
Use an FTP client to connect to the IES-612-51A.
Figure 205 Configuration File Example
#### sysinfo
sys info hostname ""
sys info location ""
sys info contact ""
#### snmp
sys snmp getcommunity public
sys snmp setcommunity public
sys snmp trapcommunity public
sys snmp trustedhost 0.0.0.0
sys snmp trapdst set 1 0.0.0.0 162
sys snmp trapdst set 2 0.0.0.0 162
sys snmp trapdst set 3 0.0.0.0 162
sys snmp trapdst set 4 0.0.0.0 162
#### server
sys server enable telnet
sys server enable ftp
sys server enable web
sys server enable icmp
sys server port telnet 23
sys server port ftp 21
--------------- Snip ------------------------------------------------------
-------------
Figure 206 Example: Use an FTP Client to Connect to the IES-612-51A
C:\> ftp <IES-612-51A IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin