Filter
Top Products
Chapter 43 Alarm Commands
IES-612-51A User’s Guide
287
43.8 Alarm History Show Command
Syntax:
ras> alarm history show [<severity>|all] [<alarm>|all] [<condition>|all]
[<sdate>|all] [<edate>|all] [for|rev] [detail]]
where
This command displays historic alarms by severity, alarm category, alarm condition and/or
dates.
The following example displays the historic critical level alarms for all alarm categories, and
all conditions.
43.9 Alarm History Clear Command
Syntax:
ras> alarm history clear [<alarm>|all <condition>|all] <severity>
This command removes historic alarm entries by alarm category, alarm condition or severity.
The following example removes the historic minor level alarms for all alarm categories, and
all conditions.
<sdate> =
The start date, in yyyy/mm/dd format.
<edate> =
The end date, in yyyy/mm/dd format.
[for|rev] =
The displaying order. Use for to display in chronological
order starting from the oldest alarm. Use
rev to display in
reverse chronological order starting from the most recent
alarm.
[detail] =
Display in-depth alarm information.
Figure 142 Alarm History Show Command Example
ras> alarm history show major all all all all rev detail
no alarm condition severity timestamp source
------ ------ -------------------- -------- -------------- -------
1 enet -down major 01/01 00:00:12 enet 1
* NTENET1:GbE interface is down
2 enet +down major 01/01 00:00:10 enet 1
* NTENET1:GbE interface is down
Figure 143 Alarm History Clear Command Example
ras> alarm history clear minor