Chapter 40 Alarm
IES-612-51A User’s Guide
252
Figure 130 Alarm Event Setup
The following table describes the labels in this screen.
Table 85 Alarm Event Setup
LABEL DESCRIPTION
Alarm Status Click Alarm Status to go to a screen that displays the alarms that are currently
in the system (see Section 40.2 on page 249).
Alarm Port Setup Click Alarm Port Setup to go to a screen where you can configure the alarm
severity threshold for recording alarms on an individual port(s). See Section
40.5 on page 254.
Index This field displays the index number of the alarm in the list. Click this to specify
the severity level of an alarm(s) and where the system is to send the alarm(s).
See Section 40.4.1 on page 253.
Alarm This field displays the alarm category to which the alarm belongs.
eqpt represents equipment alarms.
dsl represents Digital Subscriber Line (DSL) alarms.
enet represents Ethernet alarms.
sys represents system alarms.
Condition Code This field displays the condition code number for the specific alarm message.
Condition This field displays a text description for the condition under which the alarm
applies.
Facility This field displays the log facility (local1~local7) on the syslog server where the
system is to log this alarm. This is for alarms that send alarms to a syslog
server.