Filter
Top Products
Chapter 52 ADSL Commands
IES-612-51A User’s Guide
364
" Wait at least one minute after using the line diagnostic set command before
using this command.
The following example displays the line diagnostics results for DSL port 1.
The following table lists the line diagnostics test parameters that display, see the ITU-T’s
G.992.3 for more information.
Figure 248 Line Diagnostics Get Command Example
ras> adsl linediag getld 1
Line_Diagnostics_Parameter,_channel: 0
number_of_subcarries: 256 32
hlinScale: 19625 32767
latn: 54 0
satn: 52 8
snrm: 60 60
attndr: 12140000 1120000
farEndActatp: 75 125
i li.rl li.im log QLN SNR
0 32768 32768 1023 255 255
1 32768 32768 1023 255 255
2 32768 32768 1023 255 255
3 32768 32768 1023 255 255
4 32768 32768 1023 255 255
5 32768 32768 1023 255 255
6 11604 4752 83 191 132
7 17794 5598 48 190 139
8 22385 5567 30 184 147
9 24903 5163 21 163 152
10 26768 5013 15 185 159
11 29179 5494 8 175 165
12 31605 6574 1 172 168
13 32766 8020 1023 186 170
14 32159 9597 1023 183 173
15 30990 11350 1023 182 173
16 30432 13730 1023 186 172
17 30259 16694 1023 182 170
18 29137 19570 1023 171 170
19 26499 21554 1023 186 172
20 23288 22973 0 173 174
Table 96 Line Diagnostics Get Command
LABEL DESCRIPTION
number_of_
subcarries
Discrete Multi-Tone (DMT) modulation divides up a line’s bandwidth into sub-
carriers (sub-channels) of 4.3125 kHz each.
The first number is the total number of DMT sub-carriers the DSL connection is
using. The second number indicates how many upstream DMT sub-carriers the
DSL connection is using.
hlinScale: The channel characteristics function is represented in linear format by a scale
factor and a complex number. These are the maximum upstream and
downstream scale factors used in producing the channel characteristics
function.